Venting Applications
Fox Venturi Ejectors eliminate the need for blowers or fans with XP motors, Teflon-coated blades, or other very expensive options that add enormously to cost but still don’t protect your process from intermittent failure.
Find Out More about Air and Gas Ejectors in Venting Applications
Pump Priming Applications
A Fox air ejector, driven with compressed air at 60 – 100 psig, can prime any type of pump and associated suction hose and pipe – without having to pour water into the pump housing.
Find Out More about Air and Gas Ejectors for Pump Priming Applications
Gas Mixing and Dilution Applications
Fox has manufactured Fox Venturi Ejectors to mix and blend gasses in hundreds of different applications, ranging from diluting exhaust gas to creating precise gas mixtures for industrial gas blending.
Find Out More about Air and Gas Ejectors for Gas Mixing and Dilution
Creating Deep Vacuum
Some applications require that very deep vacuum levels are obtained with ejectors. Ejectors can be staged to pull progressively deeper vacuum levels.
Find Out More about Air and Gas Ejectors for Deep Vacuum
Blowdown Applications
Fox Venturi Gas Eductors or Ejectors have been used in high pressure blowdown applications for 30+ years. In this application, a tank or vessel can begin the blowdown or exhaust process by simply blowing out through a venturi ejector – to atmosphere or scrubber or flare.
Find Out More about Air and Gas Ejectors for Blowdown Applications
Avoiding CRN Requirements for Ejectors
Venturi jet ejectors that use a motive gas pressure below 14 psig are exempt from CRN requirements. This enables Fox Valve to deliver quickly modified venturi gas ejectors – using air, N2, CO2, nat gas, etc. at 14 psig or below.
Find Out More about Air and Gas Ejectors without CRN Requirements
