Fox Solids Conveying Test Lab

Come Visit Us in Dover, New Jersey, USA!

Fox Solids Conveying Test Lab
Our research facility in Dover, NJ is used for testing the performance of our equipment with a wide range of materials.

Fox Venturi Products operates a state-of-the-art solids conveying test center, complete with numerous convey test loops, blowers (both regenerative and positive displacement,) as well as loading, dosing, and metering equipment. We encourage our existing and potential customers to visit our facility and witness their own product being conveyed in our test loop. We will try to mimic your actual operating conditions as closely as possible in order to maximize the accuracy of our test results.

Our test system can handle materials of any density, from micron size to 1-inch chunks at conveying pressures from 0.5 to 110 psig [35 mbarg to 7.5 barg.] We offer 1 inch, 2 inch, 3 inch, and 4 inch convey lines up to 220 ft. long for solids convey rates up to approximately 12,000 lb/hr.

If you are interested in sending your material to our test lab for convey testing, please complete an Application Data Sheet along with the Material Testing Request form at the bottom of this page.

Please visit the Contact Us page for directions to our facility and feel free to call us at 973-328-1011 with any questions.

Fox Solids Test Lab Instrument Panel
Our facility is fully equipped with performance monitoring and data logging equipment.