What are Fox Liquid Eductors?

Fox Liquid Eductors are venturi jet devices that use pressurized liquid to entrain, mix and pump other liquids, slurries, gases or dry solids. Eductors consist of two basic parts, the motive nozzle, which converts the pressure energy to kinetic (velocity) energy, and the suction chamber/diffuser section where the entrainment and mixing take place.

No Moving Parts: Eductors are very reliable, with no seals or packing and are almost entirely maintenance-free.
Cost Effective: Particularly with corrosives
Easy Installation: Eductors are as easy to install as a common pipe "tee" and are available with a variety of end connections.
Handles Corrosive and/or Erosive Fluids: Due to their simple construction, eductors can be made from any machinable material for corrosive or erosive fluids.

LIQUID EDUCTORS
	Liquid eductors use motive water or other liquids to pump, dilute, mix, or blend other liquids pumping and mixing liquids
PUMPING GASSES OR VAPORS with LIQUID EDUCTORS
	Liquid eductors use water or other liquids under pressure to create vacuum that can be used to suck in other liquids to mix or dilute, or to exhaust gasses. venting/exhausting gasses with liquid eductors
SLURRY -EDUCTORS for BLENDING LIQUIDS & SOLIDS
Click To Enlarge	These eductors are used to mix or blend solids into solutions or slurries slurry eductors
MINI-EDUCTORS
	Mini-eductors are 1/4" eductors used for small liquid blending applications. If your flow rates are below 2 - 3 GPM, then a mini-eductor may be required. mini-eductors

Fox Venturi Eductors / Fox Valve
Dover, NJ 07801 USA
Tel: 973.328.1011  Fax: 3651
E-mail: info@foxvalve.com