Conveying Cement Kiln Spill ...
with Fox Venturi Eductors

Fox Eductors Are Being Installed Beneath Kilns to Catch
and Convey Hot Kiln Spills Before They Hit The Ground

Material can be up to 1500° F/800° C
Convey Distances up to 200 ft/70 m

With no moving parts, Fox eductors can be applied to applications that just seemed to have no solutions with the "normal' equipment used in cement plants. Fox eductors, made in 316 ss, can happily convey material at 1500° F or higher, glowing red on occasion, with no maintenance required.

For more information, request a reprint of the published Case History regarding conveying Kiln Spill with Fox Eductors that appearred in WORLD CEMENT.

BEFORE
Installation of Fox Venturi Eductor:

Before:
The kiln spill was allowed to fall into the room shown above, cool, and then get moved with fleet of front end loaders.


AFTER
Conveying Kiln Spill w/Fox Eductors

After:
Material falls directly into a 316 ss Fox eductor, where it is conveyed - at 1500° F - back to the kiln with no moving parts.

Back Return to Home Page Next Screen


Fox Venturi Eductors / Fox Valve
Dover, NJ 07801 USA
Tel: 973.328.1011  Fax: 3651
E-mail: info@foxvalve.com